DS1818R-10+T&RThe DS1818R-10+T&R is an EconoReset Supervisory Circuit with pushbutton. The DS1818 EconoReset uses a precision temperature-compensated reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for approximately 150 ms to allow the power supply and processor to stabilize. The DS1818 also monitors a pushbutton on the reset output. If the reset line is pulled low, a reset is generated upon release and the DS1818 output will be held in reset output low for typically 150ms., Improves reliability of processor operation — Monitors pushbutton for external override, Efficient open-drain output with internal 5.5kR pull-up resistor saves power and space, Allows for easy design with no complicated settingsМикросхемы / Микросхемы управления питанием / Мониторы питания, Супервизоры Корпус: SOT-23-3, инфо: Монитор питания, t=150мс, кнопка сброса, 3.3В, 10%, -40…+80C
